RAPID-DRAIN™

Sub-surface drainage and membrane protection

Product Description

RAPID-DRAIN™ is a highly efficient geo-composite sub-soil drainage system comprising cuspated plastic sheet bonded to non-woven heavy-duty geotextile filter fabric.

Product Uses

RAPID-DRAIN™ is specifically designed for use with all GCP waterproof membranes including GCP BITUTHENE® or PREPRUFE® sheet membranes. It provides uninterrupted drainage to lift pits, basement retaining walls, bridge abutments, planter box walls or floors. RAPID-DRAIN™ is also used to collect and control water under landscaped podium decks, terraces or roofs.

Features

  • RAPID-DRAIN™ complies with Green Star requirements and has zero VOC rating.
  • Reduces hydrostatic water pressure build-up behind structures such as retaining walls, basements and foundations.
  • Reduces the potential for damage caused by movement and expansive soils.
  • Easy to install - has an over-locking edge profile to assist with stability of system.
  • The free draining structure and geo fabric layer prevents silt from clogging footing drainage lines, planter box floor outlets and landscaped deck outlet drains.
  • Will prevent flooding and deposition of soil and debris on surrounding paved surfaces.
  • Provided added benefits in facilitating the protective function of the waterproofing membrane system.

Preparation

Inspect waterproofing for damage and repair as required

Application

Install RAPID-DRAIN™ with geo fabric facing water inflow. Cut to suit profiles and over-lock side joints carefully.

  • On any vertical surfaces use pressure sensitive tape, other suitable adhesives or battens to hold RAPID-DRAIN™ in place.

Typical Properties

Property Typical Value
Structure Moulded HDPE and nonwoven geotextile filter fabric
Thickness 10mm+
Compressive Strength >700kPa ASTM D1621
Max In Plane Flow Rate 15600L/m2/hr ASTM D4716
Installed Vertical Flow Rate 9300L/m2/hr ASTM D4716
Installed Horiz Flow Rate 1800L/m2/hr ASTM D4716
Textile Tensile Strength 0.5kN ASTM D4632
Textile Puncture Strength >0.3kN ASTM D4833

Do not use pins or other mechanical fasteners that penetrate or damage any applied waterproof membrane.

Packaging

Available in 1.22m x 15.24m (18.6m2) rolls. Store upright in protected area.

Health and Safety

In case of spills and accidents, refer to the MSDS of the products or when in doubt contact your local GCP representative. Always wear protective clothing, gloves and protective goggles when handling chemical products. .For full information, consult the relevant MSDS

Limitations

Information contained in this document does not cover all possible application scenarios or imply product suitability for an application. Please contact your local GCP representative or the GCP Technical Department for further information.

Warranties

GCP and contractors recognised by GCP as experienced in the application of GCP products will provide warranties for individual projects. Warranty periods offered are dependent on project details and complexity. Requests for very long warranty periods may necessitate increased membrane thicknesses to ensure longevity. Contact your local GCP representative for further details.

 

Release Date: 02/11/18. The information contained in this product data sheet supersedes all previous versions.

 

gcpat.com.au | Australia customer service: 1800 855 525

Australia 1800 334 444 New Zealand 0800 552 235 China Mainland +86 21 3158 2888 Hong Kong +852 2675 7898 India +91 124 402 8972 Indonesia +62 21 893 4260 Japan +81 3 5226 0231 Korea +82 32 820 0800 Malaysia +60 3 9074 6133 Philippines +63 49 549 7373 Singapore +65 6265 3033 Thailand +66 2 709 4470 Vietnam +84 8 3710 6168

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

RAPID-DRAIN and BITUTHENE are trademarks of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2018 GCP Applied Technologies, Inc. All rights reserved.

Printed in Australia  GCP PDS 073 07/17

GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP Australia Pty. Ltd., 14 Colebard Street West, Archerfield, Brisbane, Queensland 4108, Australia
This document is only current as of the last updated date stated below and is valid only for use in Australia. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com.au. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2023-07-06

https://gcpat.com.au/en-gb/solutions/products/rapid-drain