DAREX® Slump Enhancer

Workability-enhancing admixture

Product Description

DAREX® Slump Enhancer is a revolutionary advancement in time-activated, polycarboxylate-based technology. This patent pending, workability-enhancing (slump and flow) admixture, when used in conjunction with any water reducer (standard, mid range, or high range), will significantly increase the duration of slump or flow retention. DAREX® Slump Enhancer is formulated to comply with the requirements of AS 1478 Type SN. DAREX® Slump Enhancer does not contain chloride as a functional ingredient. DAREX® Slump Enhancer is manufactured under closely controlled conditions and formulated for use as received. One litre weighs approximately 1.05kg ± 0.02kg.

Uses

DAREX® Slump Enhancer is specifically intended for use where extended workability with minimal time of setting extension is desired without compromising plastic or hardened concrete properties. DAREX® Slump Enhancer produces concrete with consistent slump properties while providing the degree of workability necessary to provide easy placement and consolidation.

Conventional high range water reducers may not provide sufficient slump life for applications with unpredictable or long transportation and placement times. As a result, concrete may be re-tempered with water at a job site to achieve desired workability. The addition of DAREX® Slump Enhancer used in conjunction with Type HWR Superplasticiser eliminates the need for re-tempering at job sites to achieved the desired workability.

Product Advantages

  • Flexible degree of slump retention through adaptable dosing
  • Increases slump life with minimal impact on set times
  • Better control of operational costs by adjusting the slump life retention on an “as needed” basis during the initial dosage adjustment
  • Eliminates the need for re-tempering with water at the job site
  • Improves workability at job sites resulting in ease of placement

Compatibility with Other Admixtures and Batch Sequencing

DAREX® Slump Enhancer is compatible with all water reducers, midrange water reducers and high range water reducers from GCP Applied Technologies, as long as they are added separately to the concrete mix. In general, it is recommended that DAREX® Slump Enhancer be added to the concrete mix near the end of the batch sequence for optimum performance. Different sequencing may be used if local testing shows better performance.

Pretesting of the concrete mix should be performed before use and as conditions and materials change in order to assure compatibility with other admixtures, and to optimise dosage rates, addition times in the batch sequencing and concrete performance.

Dispensing Equipment

Please contact your local GCP representative for further information regarding the dispensing equipment for this product.

Addition Rates

Addition rates of DAREX® Slump Enhancer can vary with the type of application and the desired slump specifications, but will range from 50 to 500mL / 100kg of total cementitious as an extended slump life admixture. In most instances, the addition of 100 to 200mL / 100kg of total cementitious will be sufficient. At higher dosage rates, some water may have to be removed from the mix to maintain plastic concrete cohesion. GCP strongly recommends pretrial testing the concrete (lab and field) with DAREX® Slump Enhancer before production use to optimise dosage rates due to concrete materials, ambient conditions and project requirements that change over time. Please consult your local GCP representative for more information and assistance.

Packaging and Handling

DAREX® Slump Enhancer is available in bulk, delivered by metered trucks, in 1,000L disposable totes and 205L drums.

DAREX® Slump Enhancer should be stored at temperatures above 0ºC and below 50ºC for proper dispensing and use. It will begin to freeze at 0ºC, but will return to full strength after thawing and thorough agitation.

Material Safety Data Sheet (MSDS) is available on request.

Health and Safety

Please refer to DAREX® Slump Enhancer MSDS or consult GCP Applied Technologies.

gcpat.com.au | Australia customer service: 1800 855 525

Australia 1800 855 525 New Zealand +64 9 448 1146 China Mainland +86 21 3158 2888 Hong Kong +852 2675 7898 India: Chennai +91 44 6624 2308 Manesar +91 124 488 5900 Indonesia +62 21 893 4260 Japan +81 3 5226 0231 Korea +82 32 820 0800 Malaysia +60 3 9074 6133 Philippines +63 49 549 7373 Singapore +65 6265 3033 Thailand +66 2 709 4470 Vietnam +84 8 3710 6168

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

DAREX is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2018 GCP Applied Technologies, Inc. All rights reserved.

GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP Australia Pty. Ltd., 14 Colebard Street West, Archerfield, Brisbane, Queensland 4108, Australia
This document is only current as of the last updated date stated below and is valid only for use in Australia. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com.au. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2023-07-06

https://gcpat.com.au/en-gb/solutions/products/darex-slump-enhancer