YTL™ Geotextile Sheet

An auxiliary product designed for drainage applications such as the layering of underground drainage pipes and basement

DownloadPdf
Add

Product Description

YTL™ Geotextile Sheet is a non-woven, needle punched polypropylene filter fabric. Various grades are available for different applications.

Applications

  • Underground drainage

  • Car parks

  • Bridge abutments

  • Green roofs

  • Retention bunds

  • Grass paved areas

  • Tunnel

Physical Properties

Properties    Unit                                                  Typical Value                       
    100g /m2 150g /m2 200g /m2 250g /m2 300g /m2
Thickness mm ≥0.9 ≥1.3 ≥1.7 ≥2.1 ≥2.4
Tensile At Break KN / m ≥2.5 ≥4.5 ≥6.5 ≥8 ≥9.5
Elongation At Break % 25-100 25-100 25-100 25-100 25-100
Tearing Strength KN ≥0.08 ≥0.12 ≥0.16 ≥0.20 ≥0.24

Test method: GB/T17638-1998
Typical test values may represent average values from samples tested

Product Advantages

  • Construction — conforms easily to the ground or trench surface for trouble-free installation.

  • Strength — withstands severe installation stresses with high-puncture and burst resistance.

  • Filtration — high-permeability properties provide high water flow rates while providing excellent filtration properties.

  • Environments — chemically stable in a wide range of aggressive environments.

  • Cost-effective — provide economical solutions to many civil engineering applications including a cost-effective alternative to graded aggregate filters.

Supply

                     Unit                                                                                                   Typical Value                                                                   
    100g /m2 150g /m2 200g /m2 250g /m2 300g /m2
Roll Size m 1.78 width x 250 length 1.78 width x 250 length 1.78 width x 250 length 1.78 width x 250 length 1.78 width x 250 length
Roll Weight kg 44.5 66.75 89 111.25 133.5

Health and Safety

Read the product label and Material Safety Data Sheet (MSDS) before use. Users should acquaint themselves with all risk and safety phrases. MSDS can be obtained from GCP Applied Technologies.

Technical Services

For assistance with working drawings for projects and additional technical advice, please contact GCP Applied Technologies.

gcpat.com.au | Australia customer service: 1800 855 525

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

YTL is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2016 GCP Applied Technologies, Inc. All rights reserved.

GCP Australia Pty. Ltd., 14 Colebard Street West, Archerfield, Brisbane, Queensland 4108, Australia.
This document is current only as of its stated date and applies to use in Australia only. Always refer to the latest information available at www.gcpat.com.au. GCP does not accept responsibility for information obtained from other sources. For further information or in the event of any conflict, contact GCP Customer Service.

Last Updated: 2026-04-29

https://gcpat.com.au/en-gb/solutions/products/ytl-geotextile-sheet