ULTRAURE™ HD Clear
UV Resistant Clear Protective Coating
Product Product Description
A tough, ready to use clear, non-yellowing, aliphatic polyurethane coating which protects and surface seals internal or external concrete or masonry surfaces.
Product Advantages
- Non-Yellowing, hard wearing
- Contains UV absorber
- Resistant to dilute acids, alkalis, petrol, grease and oil
- Reduces maintenance costs
- Simple application and fast cure
- Very durable wet-look finish
Uses
ULTRAURE™ HD Clear can be applied to brick, block, concrete, pre- cast panels, paving and stone including – coloured or plain concrete driveways, floors and panels; exposed aggregate, slate or dense stone paving; dry plant room floors.
Also used as durable surface sealer to decorative flake-finish and GCP epoxy flooring systems.
Typical Properties
| Property | Result |
|---|---|
| Colour | Clear Liquid |
| Finish | Full Gloss |
| Solids Content | 40% |
| S.G. | 0.9 g/ml |
| Drying Time @ 25°C | 30 minutes |
| Hard Dry | Overnight |
| Recoat Interval | 18 hrs Maximum |
| Minimum Application Temp | >10°C |
Preparation
Surfaces must be sound, dry and free from dust, loose matter, oil, grease or other contaminants. Consider diamond grinding to obtain an appropriate substrate finish.
NOTE: Beware of rising damp in concrete or moisture penetration through cracks or construction joints.
Application
Do not thin - apply uniformly using a roller, brush or spray. A non-slip surface may be achieved by the use of:
- Non-Slip Aggregate @ approx 0.4kg/m²
- Glass beads @ 90m²/kg - Typical COF 0.54
- Fine sand @ 2kg/m² - Typical COF 0.63
Regular maintenance (2-5 years) is recommended. Clean surface, sand and wipe with MULTITEK™ Xylene. Apply a further 1 - 2 coats as required.
Coverage
Flake Floors – 3 coats @ 4m2/litre/ coat
Concrete Floors – 2-3 coats @ 6m2/litre/ coat
Walls (concrete or masonry) – 2 coats @ 8m2/litre/ coat
Packaging
ULTRAURE™ HD Clear is packed in 20 litre pails.
Storage
Store unopened containers in a cool dry place. Once opened, material will become unusable within a few days.
Shelf Life
Unopened containers have 12-month shelf life from date of manufacture, when stored in a dry, cool place.
Precautions
Liquid is flammable. Keep away from open flame and use only in well-ventilated areas. Consult SDS before use, use PPE as required. Fumes may contaminate foodstuffs.
Clean-up
Remove any uncured ULTRAURE™ HD Clear with MULTITEK™ Xylene. Exercise care when using solvents.
Health and Safety
In case of spills and accidents, refer to the Safety Data Sheet (SDS) of the products or when in doubt contact your local GCP representative. Always wear protective clothing, gloves and protective goggles when handling chemical products. For full information, consult the relevant SDS.
Limitations
ULTRAURE HD Clear is a surface sealer only. It is not a waterproofing membrane.
Information contained in this document does not cover all possible application scenarios or imply product suitability for an application. Please contact your local GCP representative or the GCP Technical Department for further information.
Warranties
GCP and contractors recognised by GCP as experienced in the application of GCP products will provide warranties for individual projects. Warranty periods offered as a surface sealer and coating are dependent on project details and complexity.
Contact your local GCP representative for further details.
gcpat.com.au | Australia customer service: 1800 855 525
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
ULTRAURE™, and SILCOR® are trademarks, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2024 GCP Applied Technologies, Inc. All rights reserved.
GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA GCP Australia Pty. Ltd., 14 Colebard Street West, Archerfield, Brisbane, Queensland 4108, Australia This document is only current as of the last updated date stated below and is valid only for use in Australia. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com.au. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2024-11-06
https://gcpat.com.au/en-gb/solutions/products/ultraure-hd-clear