MULTITEK™ XYLENE

Solvent for General Purpose Use

DownloadPdf
Add

Product Description

MULTITEK™ XYLENE is provided in a single grade: Xylene (Xylol). It is a high quality aromatic hydrocarbon based solvent with low level impurities.

Product Uses

MULTITEK™ XYLENE is used for a variety of functions in association with GCP waterproofing materials, sealants and adhesives including:

  • A compatible diluent for solvent based primers, membranes, coatings and adhesives
  • A cleaner for suitable substrates prior to installation of primers, membranes, coatings, adhesives and sealants.
  • An equipment cleaner for various GCP materials and equipment associated with their use

Features

  • High quality and purity
  • Compatibility with appropriate GCP products and does not result in solvent boil or bubbling.
  • Does not leave any harmful residues on cleaned and prepared substrates

Application Guidelines

Use MULTITEK™ XYLENE as and where required in the appropriate GCP product data sheets.

  • When used as a diluents, use only the specified amount - do not over-thin products.
  • When used as a surface cleaner, ensure that substrate is resistant to solvent. Try a small testpatch if there is any doubt.
  • Use fully in accordance with product MSDS provisions.

Typical Properties

Property Typical Value
Colour Clear
S.G. 0.9 g/ml
Viscosity 100 mPa.s
Percent Volatile 100%

Storage

Store unopened containers in a cool dry place. Keep away from any fire hazards or ignition sources. Exercise care when handling and review all MSDS before storage or use.

Packaging

MULTITEK™ XYLENE is packed in 20 litre metal pails and 200 litre drums.

Health and Safety

In case of spills and accidents, refer to the MSDS of the products or when in doubt contact your local GCP representative. Always wear protective clothing, gloves and protective goggles when handling chemical products. For full information, consult the relevant MSDS.

Coverage

Coverage will vary according to use.

Product Risk

MULTITEK™ XYLENE is flammable.

Exercise all due care in handling and ensure there is no open flame or ignition source nearby.

Use PPE as required.

Limitations

Information contained in this document does not cover all possible application scenarios or imply product suitability for an application. Please contact your local GCP representative or the GCP Technical Department for further information.

Warranties

GCP and contractors recognised by GCP as experienced in the application of GCP products will provide warranties for individual projects. Warranty periods offered are dependent on project details and complexity. Requests for very long warranty periods may necessitate increased membrane thicknesses to ensure longevity. Contact your local GCP representative for further details.

 

Release Date: 02/11/18. The information contained in this product data sheet supersedes all previous versions.

 

gcpat.com.au | Australia customer service: 1800 855 525

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

MULTITEK is a trademark of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2019 GCP Applied Technologies, Inc. All rights reserved.

Printed in Australia GCP PDS 067 07/17

This document is only current as of the last updated date stated below and is valid only for use in Australia. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com.au. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2023-07-06

https://gcpat.com.au/en-gb/solutions/products/multitek-xylene