CHEMCLEAR™
Clear Protective Coating
Product Description
CHEMCLEAR™ is a clear, non-yellowing, fast drying synthetic liquid penetrant, which hardens and dust proofs internal or external masonry surfaces. It deeply penetrates the surface to protect, preserve and provide a water-resistant finish.
Product Uses
There are two grades of CHEMCLEAR™
- Standard, solvent based grade
- “W”, water based grade.
It can be applied to brick, block, concrete, pre-cast panels, porous paving and stone including - coloured, plain or patterned concrete driveways, floors and panels; exposed aggregate, slate or dense stone paving; plant room floors and as a low cost anti-dust sealer for warehouse floors.
Product Advantages
- Non-Yellowing, hard wearing
- Resistant to dilute acids, alkalis, petrol, grease and oil
- Reduces maintenance costs
- Simple application and fast cure
- Very durable wet-look finish
Typical Properties
| Property | Solvent Grade | “W” Grade |
|---|---|---|
| Colour | Clear | White liquid |
| Solids Content | 25% | 25% |
| S.G. | 0.9 g/ml | 0.9 g/ml |
| Drying Time | 20 minutes | 45 min. @ 25°C |
| Hard Dry | 1 hour | 2 hours |
| Flash Point | 36°C | >100ºC |
| Solvent | Solvent Xylene | Water |
Preparation
Surfaces must be sound, dry and free from dust, loose matter, oil, grease or other contaminants. Consider diamond grinding to obtain an appropriate substrate finish.
Application
Dilute first coat up to 25% and apply uniformly to surface, work into pores using a soft bristle broom, roller, brush or spray. Spread surplus liquid to new area and continue application. Do not leave any thick liquid film as it may dry opaque. After drying, a second undiluted coat should be applied to seal surfaces uniformly.
Coverage
Usage is 6-7 m2/litre, dependant on porosity of surface.
Packaging
CHEMCLEAR™ is packed in 20 litre pails and 200 litre drums.
Storage
Store unopened containers in a cool dry place. Once opened, material will become unusable within a few days.
Shelf Life
Unopened containers have 12-month shelf life from date of manufacture, when stored in a dry, cool place.
Precautions
Solvent Grade CHEMCLEAR™ liquid is highly flammable. Keep away from open flame and use only in well-ventilated areas. Use PPE as appropriate. Open foods, meats, vegetables and dairy products may pick up odours while drying.
Clean-up
Remove uncured CHEMCLEAR™ W with water, and uncured solvent- based CHEMCLEAR™ with MULTITEK™ Xylene. MULTITEK™ Xylene may assist with the removal of cured product. Exercise care when using solvents. Please review all MSDS before use.
Health and Safety
In case of spills and accidents, refer to the Material Safety Data Sheet (MSDS) of the products or when in doubt contact your local GCP representative. Always wear protective clothing, gloves and protective goggles when handling chemical products. For full information, consult the relevant MSDS.
Limitations
Information contained in this document does not cover all possible application scenarios or imply product suitability for an application. Please contact your local GCP representative or the GCP Technical Department for further information.
Warranties
GCP and contractors recognised by GCP as experienced in the application of GCP products will provide warranties for individual projects. Warranty periods offered are dependent on project details and complexity. Requests for very long warranty periods may necessitate increased membrane thicknesses to ensure longevity. Contact your local GCP representative for further details.
Release Date: 02/11/18. The information contained in this product data sheet supersedes all previous versions.
gcpat.com.au | Australia customer service: 1800 855 525
Australia 1800 334 444 New Zealand 0800 552 235 China Mainland +86 21 3158 2888 Hong Kong +852 2675 7898 India +91 124 402 8972 Indonesia +62 21 893 4260 Japan +81 3 5226 0231 Korea +82 32 820 0800 Malaysia +60 3 9074 6133 Philippines +63 49 549 7373 Singapore +65 6265 3033 Thailand +66 2 709 4470 Vietnam +84 8 3710 6168
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
CHEMCLEAR, and MULTITEK are trademarks of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2019 GCP Applied Technologies, Inc. All rights reserved.
Printed in Australia GCP PDS 033 07/17
This document is only current as of the last updated date stated below and is valid only for use in Australia. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com.au. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2023-07-06
https://gcpat.com.au/en-gb/solutions/products/chemclear