BOUTIQUE

Dispersant

DownloadPdf
Add

Product Description

BOUTIQUE is the latest technology in the development of high range water-reducing superplasticising admixtures. It is an innovative, versatile, third generation polycarboxylic ether polymer developed for the masonry and pre-cast industries to maximise performance through a wide range of concrete strengths.

BOUTIQUE contains no added chlorides and complies with AS 1478.1 – 2000 Type HWR.  BOUTIQUE contains no TEA.

Dispersion

Unlike conventional superplasticisers, which rely on electrostatic repulsion, BOUTIQUE has been formulated on carboxylic ether polymers, which are comprised of lateral chains producing superior cement dispersion. Water is absorbed by the polymer, which then allows controlled cement hydration without rapid slump loss or retardation as with conventional naphthalene superplasticisers.

Product Advantages

  • Superior workability retention with no retardation.
  • High early strength achievement requiring reduced heat energy for curing.
  • High compression strengths at all ages.
  • Improved surface finish.
  • Reduced vibration for placement in reinforced concrete.
  • Easy addition during batching process.

Advantages

  • BOUTIQUE produces very high workability concrete at low water-cement ratios without segregation and loss of strength.
  • It can be added at the batch plant during the batching process.
  • Reduction of steam or heat energy curing to achieve high early strengths.
  • Requires less vibration for ease of placement in reinforced concrete.
  • Improves surface finish and off-form finishes.

Addition Rates

Addition rates of BOUTIQUE can vary depending on the application, however a typical dose range would be between 400 and 1,000mL /kgs total cementitious materials.  Higher dose rates can be considered for advanced performance.

Packaging & Storage

BOUTIQUE available in 1,000L totes and 205L durms.  Shelf life is 12 months.

Dispensing Equipment

Please contact your local GCP representative for further information regarding the dispensing equipment for this product.

Health and Safety

See BOUTIQUE Safety Data Sheet or consult GCP Applied Technologies.

 

gcpat.com.au | Australia customer service: 1800 855 525

Australia 1800 334 444 New Zealand 0800 552 235 China Mainland +86 21 3158 2888 Hong Kong +852 2675 7898 India +91 124 402 8972 Indonesia +62 21 893 4260 Japan +81 3 5226 0231 Korea +82 32 820 0800 Malaysia +60 3 9074 6133 Philippines +63 49 549 7373 Singapore +65 6265 3033 Thailand +66 2 709 4470 Vietnam +84 8 3710 6168

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

© Copyright 2019 GCP Applied Technologies, Inc. All rights reserved.

Printed in Australia

This document is only current as of the last updated date stated below and is valid only for use in Australia. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com.au. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2023-07-06

https://gcpat.com.au/en-gb/solutions/products/boutique